StanSaPro Implement Mounted Systems & Sprayers

Citrus Sprayer

Spraying orchards with a low kw tractor are now possible with a StanSaPro Double Oscillating Citrus Sprayer.


The Comet IDS 2600 260L/PM 50 Bar piston diaphragm pump or the Bertolini CK 270 270L/PM 70 Bar piston pump is fitted on the Patented “Steering Draw bar”.The steering draw bar feature is unique to the StanSaPro sprayer and the purpose is to always keep the pto shaft in line with the pump preventing damage when turning.The sprayer will always trail in the wheel track of the tractor therefore the operator will not damage the sprayer when turning.

Electronic Solenoid Valves are a standard feature on the StanSaPro Citrus Sprayer.This feature allows the operator to switch the water on and off,left and right from the cab of the tractor.The pto can stay engaged at all times while spraying

The Spray Tower consists of three sections if optional attachment is mounted namely top,middle and bottom.Valves are fitted to shut off the middle and top sections of the spray tower.This feature allows the spraying of smaller trees.

Sprayers are equipped with a Self Hydraulic Drive System for the double oscillation of the spray tower as well as the optional tower lift feature.The Self Hydraulic Drive System consist of its own oil tank with oil therefore it is not necessary to use the hydraulic ports of the tractor.

Quick couplers with ball valves are fitted on the sprayer for easy filling of chemicals.There is no need to leave the orchard with the sprayer to refill if a mixing tank is used.

The sprayer is adequate to Euro Gap requirements and has a 200 Liter clean water tank.The purpose of the clean water tank on the sprayer is to flush the system of chemicals to prolong the lifespan of the pump,pipes and overall the sprayer.

The inside of the chemical tank is fitted with a 360° rotary washer to thoroughly rinse the tank of chemicals.

The boom extension can be mounted on the Citrus Tower and  lifts up and down using a hydraulic cylinder.The cylinder is connected to the Self Hydraulic Drive System.There are three options available for the boom extensions namely 3/4″ Boom Extension (4 Nozzles on each side)Full Boom Extension(6 Nozzles on each side)1 3/4″ Boom Extension (8 Nozzles on each side).

The three way valve switches between Oscillate and Tower lift using the Self Hydraulic Drive System.

The Hydraulic lever is used to lift and lower the tower extension using the Self Hydraulic Drive System.

The double oscillation feature is unique to the StanSaPro sprayer and allows chemicals to penetrate more effectively through the trees with a whirl effect.The nozzles used are Venturi Turbo Nozzles which create air,therefore it is not necessary to make use of a fan to distribute chemicals to the trees.This allows to use a smaller tractor minimum 35KW

The Citrus tower consists of Twenty Four Venturi Turbo Nozzles.The height of the tower is 3.4 meters from the ground to the top of the tower to ensure adequate height for spraying.

The chassis and frame of the StanSaPro Citrus sprayer are Hot Dipped Galvanized to prevent rust and corrosion.The StanSaPro Citrus Sprayers are available in 1000 Liter,1500 Liter,2000 Liter and 3000 Liter.

Video Gallery

The StanSaPro Citrus Sprayer spraying Citrus in Orchard

The StanSaPro Citrus Sprayer spraying through Citrus trees